Find a Service Center
Alternate Products
- Finished Steel Gear
- 10 Diametral Pitch
- 20.0° Pressure Angle
- 14 Teeth
- 1.400" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- Four ball wear test 40 kg: 63 mm
- More cost effective, quieter running and metallic options
| No. of Teeth | 14 |
| Material | Steel |
| Torque at 900 RPM | 312 lb/in |
| Set Screw Size | 5/8 |
| Torque at 200 RPM | 431 lb/in |
| Diametral Pitch | 10 |
| Length Through Bore | 1.87 in |
| Bore Type | Finished |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 600 RPM | 354 lb/in |
| Set Screw | Yes |
| Keyway | w/Setscrew |
| Pressure Angle | 20 ° |
| Pitch Diameter | 1.4 in |
| Hub Dia. | 1.11 in |
| Torque at 1800 RPM | 230 lb/in |
| Torque at 300 RPM | 409 lb/in |
| Outside Dia. | 1.6 in |
| Torque at 1200 RPM | 279 lb/in |
| Origin | Finished Bore |
| Bore Size | 0.625 in |
| Weight | 0.401 LB |
| EAN or UPC | 781711461747 |
