Find a Service Center
- Size 1413
- 2:1 Ratio
- Double, Left - Clockwise/Right - Counter Clockwise, Left & Right Output Shaft
- Shaft Input, Facing You
description
- Designed for industrial applications where low speed/high torque drives are required.
features
- Compact, rugged construction
- Precision straight or spiral tooth bevel gears
- Shafts are ground and polished, heat treated alloy steel
- One-piece housing constructed from 60-45-10 ductile iron
- All shafts are supported by two tapered roller bearings
- Keys on the projecting shafts
- By interchanging the vent plug and drain plug you can invert the unit, thereby changing the shaft location and rotation
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Output (Shaft or Bore) Size | 1 1/4 in |
| Torque Out @ 1750 rpm | 1367 in lb |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Input Shaft Position | Facing You |
| Shaft Arrangement | #6, #7 |
| Output Configuration | Double |
| Unit Size | 1413 |
| Washdown Duty | No |
| Bolt Hole Pattern | 4.50 in x 4.50 in |
| Gear Style | Bevel |
| Bearing Type | Roller Bearing |
| Input (Shaft or Bore) Size | 1 1/4 in |
| Assembly | D |
| Relative Shaft Rotation | Clockwise, Counter Clockwise |
| Box Length | 7 5/8 in |
| Box Width | 8 3/4 in |
| Input Configuration | Shaft Input |
| Ratio | 2:1 |
| Output RPM @ 1750 rpm Input | 875 rpm |
| Output Shaft Position | Left & Right |
| Box Height | 5 5/8 in |
| Input Relation to Base | No Base |
| Torque Out @ 1150 rpm | 1596 in lb |
| Output Relation to Base | No Base |
| Weight | 39.001 LB |
| EAN or UPC | 781711613641 |
