Find a Service Center
- 6" Maximum Diameter
- 3" Stroke Length
- 1.8" Compressed Height
- 1/4" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
| Pressure [Max] | 100 psi |
| Temperature Range [Min] | -40 °F |
| Temperature Range [Max] | 150 °F |
| Air Inlet | 1/4 in |
| End Plate Diameter | 3.4 in |
| Bumpers | w/o Bumpers |
| Force @ 6 in Stroke | N/A |
| Compressed Height | 1.8 in |
| Air Inlet Type | NPT |
| Style No. | YI-1B |
| Stroke Length [Max] | 3 in |
| Blind Tap Spacing | 1 3/4 in |
| Force @ Stroke (80 psi) | 1500 lbf @ 1 in, 1500 lbf @ 2 in, 500 lbf @ 3 in |
| Force @ 4 in Stroke | N/A |
| Force @ 12 in Stroke | N/A |
| Force @ 8 in Stroke | N/A |
| Bellows Type | Single Convolution |
| Convolutions | Single |
| Recommended Isolator Design Height [Min] | 2 1/2 in |
| Force @ Maximum Stroke (80 psi) | 520 lbf |
| Force @ 5 in Stroke | N/A |
| End Closure | Style 2 End Retainer |
| Force @ 2 in Stroke | 1200 lbf |
| Force @ 3 in Stroke | 520 lbf |
| Force @ 9 in Stroke | N/A |
| Force @ 1 in Stroke | 1500 lbf |
| Recommended Isolator Design Height [Max] | 4 in |
| Weight | 1.2 LB |
