6204DDUC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100760954

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Rows of Balls	Single
Bore Type	Round Bore
Capacity	Standard Capacity
Static Load Rating [Max]	1,480.00 lbf
Limiting Speed - Grease	11000 rpm
Width	14 mm
Contact Angle	0°
O.D.	47.0000 mm
Lubricant	Mul-Temp SRL
Preload Level	None
Cage Material	Pressed Steel
Inch/Metric	Metric Bore
O.D. Type	Straight
Inner Ring Width	14 mm
Radial Internal Clearance Specification	Greater Than Normal Clearance
Material	Steel
Seal Material	Buna-N
I.D.	20 mm
Seal Type	Contact Seals
Enclosure	Double Sealed
Limiting Speed - Oil	18000 rpm
Dynamic Load Rating	2,878.00 lbf
Corner Radius [Min]	1.00 mm
Precision	Standard
Precision Level	Standard (ABEC 1)
icNumber	7695848
Radial Internal Clearance	C3
Snap Ring	No Snap Ring
Locking Device	No Locking Device
Outer Ring Width	14 mm
Ball Material	Steel
Cage Type	Metal
Bearing Type	Radial
No. in Set	Single Bearing
Weight	0.227 LB
EAN or UPC	29176064173