The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Flow Controls
w/o Flow Controls
Slide Configuration Option Code
A
Port Size
1/4
Cylinder Seal Material
Buna-N
Weight per Inch
0.63 lb
Cushions - Slide
No Cushions
Dowel Pin Holes
w/o Dowel Pin Holes
Pressure [Max]
750 psi
Slide Type
Thrust Slide
Port Type
NPTF
Shock Absorbers - Slide
Shock Absorber w/Stroke Adjuster (Both Ends)
Intermediate Stroke
N/A
Support Rod Material
Steel
Support Rod Diameter
25 mm
Proximity Sensor Code
J1
Temperature Range [Max]
165 °F
Cylinder Bore Size
1.5 in
Temperature Range [Min]
0 °F
Cylinder Type
NFPA Hydraulic Cylinder
Bumpers - Slide
No Bumpers
Positions
2 Position
Slide Orientation
Right Hand (Standard)
Base Wt.
9.83 lb
Proximity Sensor
Prox Ready, 12 mm
Bearing Type
Composite Bearing w/Oversized Support Rods
Stroke Tolerance
+0.030 in / -0.000 in
Series
HBT
Stroke
8 in
Port Location
Standard (Position 1)
Weight
14.87 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
