The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Stroke Tolerance
+0.030 in / -0.000 in
Support Rod Material
Steel
Port Location
Standard (Position 1)
Dowel Pin Holes
w/o Dowel Pin Holes
Proximity Sensor Code
None
Slide Type
Thrust Slide
Positions
2 Position
Port Type
NPTF
Base Wt.
9.83 lb
Proximity Sensor
No Proximity Sensor
Flow Controls
w/o Flow Controls
Bumpers - Slide
Bumpers w/Adjustable Stop Collar (Both Ends)
Slide Orientation
Right Hand (Standard)
Cylinder Seal Material
Buna-N
Series
HBT
Shock Absorbers - Slide
No Shock Absorber
Pressure [Max]
750 psi
Cylinder Bore Size
1.5 in
Bearing Type
Composite Bearing w/Oversized Support Rods
Port Size
1/4
Weight per Inch
0.63 lb
Stroke
8 in
Intermediate Stroke
N/A
Cylinder Type
NFPA Hydraulic Cylinder
Slide Configuration Option Code
B4
Support Rod Diameter
25 mm
Cushions - Slide
No Cushions
Temperature Range [Max]
165 °F
Temperature Range [Min]
0 °F
Weight
14.87 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
