Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 10" Stroke
- Steel Rails
- Composite Bearing
- 1 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Shock Absorbers - Slide | No Shock Absorber |
| Cushions - Slide | No Cushions |
| Series | HBT |
| Positions | 2 Position |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Cylinder Bore Size | 1.5 in |
| Support Rod Diameter | 20 mm |
| Stroke | 10 in |
| Flow Controls | w/o Flow Controls |
| Proximity Sensor | No Proximity Sensor |
| Support Rod Material | Steel |
| Bearing Type | Composite Bearing |
| Base Wt. | 8.86 lb |
| Port Location | Standard (Position 1) |
| Intermediate Stroke | N/A |
| Slide Orientation | Right Hand (Standard) |
| Cylinder Seal Material | Buna-N |
| Proximity Sensor Code | None |
| Temperature Range [Max] | 165 °F |
| Port Type | NPTF |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Slide Configuration Option Code | None |
| Pressure [Max] | 750 psi |
| Weight per Inch | 0.48 lb |
| Bumpers - Slide | No Bumpers |
| Port Size | 1/4 |
| Temperature Range [Min] | 0 °F |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Slide Type | Thrust Slide |
| Weight | 13.66 LB |
