Find a Service Center
- Single Row Radial Bearing
- 3/8" ID x 7/8" OD x 9/32" Wide
- Double Shielded
description
- Precision-ground 1600 series bearings are specially designed to provide a line of low-cost yet high quality bearings for adaptations. They are made in easy-to-use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5,000 rpm. The 1600 series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer or separator is used to increase the range of allowable speeds by reducing ball-to-ball contact friction. The 1600 series radial bearings are available open, single, or doubled shielded, or single or double sealed. Double-sealed and double-shielded bearings are supplied grease packed as standard. Open and single-closure bearings can be supplied greased on request.
features
- Improved ball groove finish
- Ground bores
- Grease packed
- Nylon seals
- Precision-ground on all contact surfaces
- Easy-to-use inch dimensions
- Medium loads
- Max speed range - 5000 - 6000 rpm
- Through-hardened bearing steel
- Nylon retainer standard
- Greased, double-sealed, or double-shielded standard
- Available single sealed or single shielded, open, and with or without grease
| Seal Material | Metal |
| Outer Ring Width | 9/32 in |
| Origin | Single Row Radial |
| Lubricant | General Purpose |
| Radial Internal Clearance | Normal |
| Limiting Speed - Grease | 6000 rpm |
| Limiting Speed - Oil | 6000 rpm |
| Preload Level | None |
| Seal Type | Non-Contact Seals |
| Width | 9/32 in |
| Locking Device | No Locking Device |
| O.D. | 0.875 in |
| Ball Material | Steel |
| Capacity | Standard Capacity |
| Inch/Metric | Inch Bore |
| icNumber | 7695900 |
| Radial Internal Clearance Specification | Normal Clearance |
| Bearing Type | Radial |
| Enclosure | Double Shielded |
| Precision Level | Standard (ABEC 1) |
| Inner Ring Width | 9/32 in |
| Bore Type | Round Bore |
| Sealed Width | 11/32 in |
| Static Load Rating [Max] | 255 lbf |
| I.D. | 3/8 in |
| Material | Steel |
| Rows of Balls | Single |
| O.D. Type | Straight |
| Dynamic Load Rating | 644 lbf |
| Snap Ring | No Snap Ring |
| Cage Type | Plastic |
| Precision | Standard |
| Pre Lubricant | None |
| No. in Set | Single Bearing |
| Shielded Width | 9/32 in |
| Cage Material | Nylon |
| Limiting Speed | 6000 rpm |
| Fillet Radius | 0.015 in |
| Contact Angle | 0° |
| Weight | 0.03 LB |
| EAN or UPC | 637400291327 |
