Skip to content Skip to navigation menu
5300-C, 5300-SB Medium Series Bearing

5308CZZ

5300-C, 5300-SB Medium Series Bearing
Item #101169014
  • 40 mm ID x 90 mm OD x 1 7/16" Wide
  • Double Sealed
  • No Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing
5300-C, 5300-SB Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 40 mm ID x 90 mm OD x 1 7/16" Wide
  • Double Sealed
  • No Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Flush Ground No
Origin Double Row Deep Groove
Rows of Balls Double
Limiting Speed - Oil 6700 rpm
Series 5300C
Enclosure Seal On Both Sides
Width 1.44 in, 36.51 mm
No. in Set Single Bearing
Bore Type Cylindrical
Bearing Type Unmounted, Angular Contact
Preload Level C3 Axial Clearance
Locking Device No Locking Device
Limiting Speed - Grease 5000 rpm
Capacity Standard Capacity
Radial Internal Clearance Specification Normal Clearance
Fillet Radius 1.5 mm
Material Bearing Steel
Snap Ring No Snap Ring
Temperature Range [Max] 250 °F
Precision Standard
Outer Ring Width 1.44 in, 36.5 mm
icNumber 7696209
Seal Type Contacting Seal
Limiting Speed - Sealed 5000 rpm
I.D. 1.57 in, 40 mm
Seal Material Nitrile Rubber (NBR)
Precision Level Standard (ABEC 1)
Inch/Metric Metric
O.D. Type Cylindrical
Temperature Range [Min] -22 °F
Ball Material Steel
Radial Internal Clearance C3
Static Load Rating [Max] 9760 lbf
O.D. 3.54 in, 90 mm
Dynamic Load Rating 60.5 kN
Lubricant Grease
Cage Type Metal
Static Load Rating 43 kN
Inner Ring Width 1.44 in, 36.5 mm
Cage Material Bearing Steel
Contact Angle 30 Degree
Weight 2.215 LB
EAN or UPC 97741014595
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison