Find a Service Center
- 50 mm ID x 80 mm OD x 16 mm Wide
- Double Sealed (Contact)
- ABEC 1
- Standard Cage
- C3 Clearance
applications
- Textiles
- Power tools
- Electric motors
- Pumps
- Gearboxes
features
- Deep, uninterrupted raceway
- Carries axial loads in both directions
- Carries radial loads at high speeds
compliances
- In accordance with ISO 15-1981
| Material | Bearing Steel |
| Bearing Type | Deep Groove |
| Capacity | Standard Capacity |
| Preload Level | None |
| Limiting Speed - Grease | 5000 rpm |
| Locking Device | No Locking Device |
| Contact Angle | 0° |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Cage Type | Metal |
| O.D. | 3.15 in, 80 mm |
| Width | 0.63 in, 16 mm |
| I.D. | 1.97 in, 50 mm |
| Precision Level | Standard (ABEC 1) |
| Precision | Standard |
| Outer Ring Width | 0.63 in, 16 mm |
| Bearing Design | Deep Groove Design |
| Bore Type | Cylindrical |
| icNumber | 7696036 |
| Limiting Speed - Oil | N/A |
| Ball Material | Steel |
| Radial Internal Clearance | C3 |
| Enclosure | Seal On Both Sides |
| Lubricant | Grease |
| Snap Ring | No Snap Ring |
| Cage Material | Bearing Steel |
| Series | 60 |
| Rows of Balls | Single |
| No. in Set | Single Bearing |
| Seal Material | Nitrile Rubber (NBR) |
| O.D. Type | Cylindrical |
| Seal Type | Contacting Seal |
| Inch/Metric | Metric |
| Inner Ring Width | 0.63 in, 16 mm |
| Weight | 0.62 LB |
| EAN or UPC | 7316576680724 |
