Find a Service Center
- Single Row Radial Bearing (Stainless), 0.375" ID x 0.875" OD x 0.28125" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Cage Type | Metal |
| Static Load Rating [Max] | 312 lbf |
| O.D. | 0.875 in |
| Snap Ring | No Snap Ring |
| Inch/Metric | Inch Bore |
| I.D. | 3/8 in |
| Dynamic Load Rating | 830 lbf |
| Enclosure | Double Shielded |
| Rows of Balls | Single |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Fillet Radius | 0.016 in |
| Inner Ring Width | 9/32 in |
| Material | Stainless Steel |
| Precision Level | Standard (ABEC 1) |
| Capacity | Standard Capacity |
| Lubricant | Polyurea Base |
| Outer Ring Width | 9/32 in |
| Temperature Range [Min] | -30 °F |
| Origin | Single Row Radial |
| Ball Material | Steel |
| Bearing Type | Radial |
| Width | 9/32 in |
| Seal Material | Metal |
| No. in Set | Single Bearing |
| Temperature Range [Max] | 275 °F |
| Precision | Standard |
| Contact Angle | 0° |
| Radial Internal Clearance | C3 |
| Locking Device | No Locking Device |
| Cage Material | Steel |
| O.D. Type | Straight |
| Preload Level | None |
| icNumber | 7700552 |
| Seal Type | Non-Contact Seals |
| Bore Type | Round Bore |
| Weight | 0.03 LB |
| EAN or UPC | 87796074064 |
| NSN Number | 3110-00-141-9783, 3110-00-249-0636 |
