Find a Service Center
Alternate Products
- Self-Centering Style
- SLD 1350 Type
- 60 mm Inside Diameter
- 90 mm Outside Diameter
description
- A Shaft Locking Device is made up of one inner ring and one outer ring, which are held together with socket head cap screws. These rings have an inclined plane built into them. Turning the screws brings the rings together, causing the rings to expand and fill the gap between the shaft and the hub. The pressure exerted by the expanded Shaft Locking Device on the hub I.D. and shaft O.D. creates grip, which allows it to hold the shaft and hub together without the need for a key, spline, or other traditional means of connection. The connection creates a very simple, yet effective, high torque mechanical interference fit that is easy to assemble and disassemble.
features
- Easy mounting and dismounting
- Zero backlash/mechanical interference fit
- Can transmit high torque
- Unaffected by shock loads, vibration, or reversing loads
- No fretting corrosion/no bonding of parts
- Infinite axial and radial adjustability
- Allows for precise positioning to eliminate axial preloading
- Eliminates keyways
caution
- Standard, QD-style HTD sprockets may not have the torque capacity for the higher rated HT150 belts.
| Transmitted Torque (Max) | 2091 lb/ft |
| Style | Self-Centering |
| Contact Length | 20 mm |
| Locking Type | Internal Locking |
| Thickness | 1.319 in |
| Pressure on the Hub | 21321 psi |
| O.D. | 90 mm |
| No. of Screws | 8 |
| Transmitted Axial Force | 21243 lb/ft |
| Mountable Thickness | 0.787 in |
| Type | SLD 1350 |
| Screw Material | Steel |
| Torque | 26 in lb |
| Collar Width | 33.5 mm |
| Pressure on the Shaft | 23641 psi |
| Inch/Metric | Metric |
| I.D. | 60 mm |
| Screw Tightening Torque | 26 lb/ft |
| Material | Silver/Metallic |
| Total Width @ Relaxed State | 41 mm |
| Screw Style | Socket Head Cap Screw |
| Set Screw Size | M8 |
| Shaft Tolerance | -0.0018 in |
| Hub Bore Tolerance | 0.0021 in |
| Weight | 1.72 LB |
| EAN or UPC | 697904982961 |
