Find a Service Center
Alternate Products
- Self-Centering Style
- SLD 1900 Type
- 32 mm Inside Diameter
- 43 mm Outside Diameter
description
- A Shaft Locking Device is made up of one inner ring and one outer ring, which are held together with socket head cap screws. These rings have an inclined plane built into them. Turning the screws brings the rings together, causing the rings to expand and fill the gap between the shaft and the hub. The pressure exerted by the expanded Shaft Locking Device on the hub I.D. and shaft O.D. creates grip, which allows it to hold the shaft and hub together without the need for a key, spline, or other traditional means of connection. The connection creates a very simple, yet effective, high torque mechanical interference fit that is easy to assemble and disassemble.
features
- Can transmit high torque
- No fretting corrosion/no bonding of parts
- Unaffected by shock loads, vibration, or reversing loads
- Allows for precise positioning to eliminate axial preloading
- Infinite axial and radial adjustability
- Eliminates keyways
- Easy mounting and dismounting
- Zero backlash/mechanical interference fit
caution
- Parts should not be replaced individually, but rather in total
| Thickness | 1.969 in |
| Total Width @ Relaxed State | 56.01 mm |
| I.D. | 32 mm |
| Pressure on the Hub | 16389 psi |
| Inch/Metric | Metric |
| Screw Material | Steel |
| Material | Silver/Metallic |
| Mountable Thickness | 1.181 in |
| Type | SLD 1900 |
| Pressure on the Shaft | 12183 psi |
| Torque | 12.5 in lb |
| Locking Type | Internal Locking |
| Set Screw Size | M6 |
| Transmitted Torque (Max) | 538 lb/ft |
| Contact Length | 25 mm |
| Collar Width | 45 mm |
| Hub Bore Tolerance | 0.0015 in |
| No. of Screws | 8 |
| Screw Tightening Torque | 12.5 lb/ft |
| O.D. | 43 mm |
| Style | Self-Centering |
| Transmitted Axial Force | 10941 lb/ft |
| Shaft Tolerance | -0.0015 in |
| Screw Style | Socket Head Cap Screw |
| Weight | 1.102 LB |
| EAN or UPC | 697904984538 |
