Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.196" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Precision Level | Standard (ABEC 1) |
| Enclosure | Double Shielded |
| Static Load Rating [Max] | 125.00 lbf |
| Lubricant | Polyurea Base |
| Locking Device | No Locking Device |
| Material | Steel |
| Capacity | Standard Capacity |
| Inner Ring Width | 0.196 in |
| Bore Type | Round Bore |
| Dynamic Load Rating | 365.00 lbf |
| Temperature Range [Max] | 275 °F |
| Ball Material | Steel |
| icNumber | 7695899 |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Type | Non-Contact Seals |
| Fillet Radius | 0.012 in |
| No. in Set | Single Bearing |
| Contact Angle | 0° |
| Seal Material | Metal |
| Outer Ring Width | 0.196 in |
| Open Width | 0.196 in |
| O.D. | 5/8 in |
| Cage Material | Steel |
| Cage Type | Metal |
| Radial Internal Clearance | C3 |
| Inch/Metric | Inch Bore |
| Temperature Range [Min] | -30 °F |
| Bearing Type | Radial |
| O.D. Type | Straight |
| I.D. | 1/4 in |
| Width | 0.196 in |
| Snap Ring | No Snap Ring |
| Closed Width | 0.196 in |
| Precision | Standard |
| Rows of Balls | Single |
| Origin | Single Row Radial |
| Preload Level | None |
| Weight | 0.16 LB |
| EAN or UPC | 87796044166 |
| NSN Number | 3110-00-134-0190, 3110-00-227-4521, 3110-00-470-9147, 3110-00-494-4480 |
