Find a Service Center
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 9/32" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Temperature Range [Min] | -30 °F |
| Temperature Range [Max] | 275 °F |
| icNumber | 7695900 |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance | C3 |
| Outer Ring Width | 9/32 in |
| Ball Material | Steel |
| Open Width | 7/32 in |
| Capacity | Standard Capacity |
| Bearing Type | Radial |
| Snap Ring | No Snap Ring |
| Rows of Balls | Single |
| Cage Type | Metal |
| Cage Material | Steel |
| Static Load Rating [Max] | 312.00 lbf |
| Inch/Metric | Inch Bore |
| Inner Ring Width | 9/32 in |
| Locking Device | No Locking Device |
| Enclosure | Double Shielded |
| I.D. | 3/8 in |
| Dynamic Load Rating | 830.00 lbf |
| Bore Type | Round Bore |
| Material | Steel |
| O.D. Type | Straight |
| Preload Level | None |
| Closed Width | 9/32 in |
| Width | 9/32 in |
| Precision | Standard |
| Seal Material | Metal |
| O.D. | 7/8 in |
| Seal Type | Non-Contact Seals |
| Lubricant | Polyurea Base |
| Contact Angle | 0° |
| Fillet Radius | 0.016 in |
| No. in Set | Single Bearing |
| Origin | Single Row Radial |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Weight | 0.17 LB |
| EAN or UPC | 87796044227 |
| NSN Number | 3110-00-175-1120 |
