Find a Service Center
- Size 146
- 1:1 Ratio
- Vertical, Single, Clockwise, Up Output
- Horizontal Shaft Input, Facing You
description
- Designed for high efficiency, quiet operation and long service life.
features
- Gears are made of hardened alloy steel
- Shafts are heat-treated alloy steel mounted on heavy-duty, tapered roller bearings
- Housings are made of cast iron, precision-machined to ensure accurate, permanent alignment of the gears
- Shaft projections have quality oil seals
- Assembly can be mounted in any position with input shaft horizontal by relocating oil plugs in proper position
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Max. Overhung Load @ 1750 rpm | 631 lb/in |
| Input (Shaft or Bore) Size | 1 in |
| Torque Out @ 1150 rpm | 1012 in lb |
| Box Width | 8.78 in |
| Relative Shaft Rotation | Clockwise |
| Output Relation to Base | Vertical |
| Shaft Arrangement | #14 |
| Bearing Type | Roller Bearing |
| Box Length | 10.56 in |
| Assembly | P |
| Output (Shaft or Bore) Size | 1 in |
| Gear Style | Spiral Bevel |
| Output Shaft Position | Up |
| Input Relation to Base | Horizontal |
| Input Shaft Position | Facing You |
| Unit Size | 146 |
| Box Height | 4.78 in |
| Torque Out @ 1750 rpm | 905 in lb |
| Bolt Hole Pattern | 6 in x 6 in |
| Output RPM @ 1750 rpm Input | 1750 rpm |
| Input Configuration | Shaft Input |
| Ratio | 1:1 |
| Washdown Duty | No |
| Output Configuration | Single |
| Weight | 51.1 LB |
| EAN or UPC | 781711422526 |
