Find a Service Center
- Size 146
- 1:1 Ratio
- Vertical, Single, Clockwise, Up Output
- Horizontal Shaft Input, Facing You
description
- Designed for high efficiency, quiet operation and long service life.
features
- Gears are made of hardened alloy steel
- Shafts are heat-treated alloy steel mounted on heavy-duty, tapered roller bearings
- Housings are made of cast iron, precision-machined to ensure accurate, permanent alignment of the gears
- Shaft projections have quality oil seals
- Assembly can be mounted in any position with input shaft horizontal by relocating oil plugs in proper position
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Torque Out @ 1750 rpm | 905 in lb |
| Unit Size | 146 |
| Ratio | 1:1 |
| Output RPM @ 1750 rpm Input | 1750 rpm |
| Output (Shaft or Bore) Size | 1 in |
| Max. Overhung Load @ 1750 rpm | 631 lb/in |
| Box Width | 8.78 in |
| Box Length | 10.56 in |
| Input Shaft Position | Facing You |
| Output Shaft Position | Up |
| Torque Out @ 1150 rpm | 1012 in lb |
| Box Height | 4.78 in |
| Output Relation to Base | Vertical |
| Gear Style | Spiral Bevel |
| Input Relation to Base | Horizontal |
| Assembly | P |
| Output Configuration | Single |
| Bolt Hole Pattern | 6 in x 6 in |
| Bearing Type | Roller Bearing |
| Input Configuration | Shaft Input |
| Relative Shaft Rotation | Clockwise |
| Input (Shaft or Bore) Size | 1 in |
| Shaft Arrangement | #14 |
| Washdown Duty | No |
| Weight | 51.1 LB |
| EAN or UPC | 781711422526 |
