Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 8" Stroke
- Stainless Steel Rails
- Composite Bearing w/Contaminant Tolerant Seals
- 1 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Slide Type | Thrust Slide |
| Proximity Sensor | No Proximity Sensor |
| Port Size | 1/4 |
| Positions | 2 Position |
| Weight per Inch | 0.48 lb |
| Temperature Range [Min] | 0 °F |
| Flow Controls | w/o Flow Controls |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Port Type | NPTF |
| Port Location | Standard (Position 1) |
| Cylinder Seal Material | Buna-N |
| Support Rod Diameter | 20 mm |
| Slide Configuration Option Code | B |
| Support Rod Material | Stainless Steel |
| Pressure [Max] | 150 psi |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Slide Orientation | Right Hand (Standard) |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Series | HBT |
| Base Wt. | 8.86 lb |
| Stroke | 8 in |
| Temperature Range [Max] | 165 °F |
| Intermediate Stroke | N/A |
| Bumpers - Slide | Bumpers (Both Ends) |
| Shock Absorbers - Slide | No Shock Absorber |
| Cylinder Bore Size | 1.5 in |
| Bearing Type | Composite Bearing w/Contaminant Tolerant Seals |
| Cushions - Slide | No Cushions |
| Proximity Sensor Code | None |
| Weight | 12.7 LB |
