Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 8" Stroke
- Stainless Steel Rails
- Composite Bearing w/Contaminant Tolerant Seals
- 1 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Proximity Sensor | No Proximity Sensor |
| Weight per Inch | 0.48 lb |
| Port Type | NPTF |
| Cylinder Seal Material | Buna-N |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Intermediate Stroke | N/A |
| Port Location | Standard (Position 1) |
| Base Wt. | 8.86 lb |
| Bearing Type | Composite Bearing w/Contaminant Tolerant Seals |
| Shock Absorbers - Slide | No Shock Absorber |
| Support Rod Material | Stainless Steel |
| Temperature Range [Max] | 165 °F |
| Slide Configuration Option Code | B |
| Pressure [Max] | 150 psi |
| Cushions - Slide | No Cushions |
| Slide Type | Thrust Slide |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Positions | 2 Position |
| Bumpers - Slide | Bumpers (Both Ends) |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Cylinder Bore Size | 1.5 in |
| Support Rod Diameter | 20 mm |
| Stroke | 8 in |
| Series | HBT |
| Port Size | 1/4 |
| Slide Orientation | Right Hand (Standard) |
| Temperature Range [Min] | 0 °F |
| Flow Controls | w/o Flow Controls |
| Proximity Sensor Code | None |
| Weight | 12.7 LB |
