Find a Service Center
- Single Row Radial Bearing, 1.125" ID x 2.125" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Bearing Type | Radial |
| Contact Angle | 0° |
| Locking Device | No Locking Device |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Type | Unsealed |
| Bore Type | Round Bore |
| Precision Level | Standard (ABEC 1) |
| Rows of Balls | Single |
| Fillet Radius | 0.031 in |
| Lubricant | Oil Preservative |
| Ball Material | Steel |
| O.D. Type | Straight |
| Static Load Rating [Max] | 1220 lbf |
| Pre Lubricant | None |
| Precision | Standard |
| Material | Steel |
| Width | 3/8 in |
| Radial Internal Clearance | C3 |
| Cage Type | Metal |
| Seal Material | None |
| Outer Ring Width | 3/8 in |
| Inner Ring Width | 3/8 in |
| icNumber | 7697583 |
| No. in Set | Single Bearing |
| Cage Material | Steel |
| O.D. | 2.125 in |
| Dynamic Load Rating | 2650 lbf |
| Preload Level | None |
| Enclosure | Open |
| Origin | Single Row Radial |
| I.D. | 1 1/8 in |
| Capacity | Standard Capacity |
| Inch/Metric | Inch Bore |
| Snap Ring | No Snap Ring |
| Weight | 0.35 LB |
| EAN or UPC | 87796040465 |
| NSN Number | 3110-00-155-8899 |
