Find a Service Center
- Single Row Radial Bearing, 1.125" ID x 2.125" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Bearing Type | Radial |
| Inner Ring Width | 3/8 in |
| Seal Type | Unsealed |
| icNumber | 7697583 |
| Locking Device | No Locking Device |
| Contact Angle | 0° |
| Cage Type | Metal |
| Outer Ring Width | 3/8 in |
| Precision | Standard |
| O.D. Type | Straight |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| I.D. | 1 1/8 in |
| Material | Steel |
| Preload Level | None |
| Seal Material | None |
| Snap Ring | No Snap Ring |
| Fillet Radius | 0.031 in |
| Origin | Single Row Radial |
| Cage Material | Steel |
| No. in Set | Single Bearing |
| Width | 3/8 in |
| Lubricant | Oil Preservative |
| Bore Type | Round Bore |
| Enclosure | Open |
| Capacity | Standard Capacity |
| Rows of Balls | Single |
| Dynamic Load Rating | 2650 lbf |
| O.D. | 2.125 in |
| Pre Lubricant | None |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance | C3 |
| Ball Material | Steel |
| Inch/Metric | Inch Bore |
| Static Load Rating [Max] | 1220 lbf |
| Weight | 0.35 LB |
| EAN or UPC | 87796040465 |
| NSN Number | 3110-00-155-8899 |
